Engenius Eoc2611p Firmware Upgrade

EOC-2611P ( Support DD-WRT or not? )

DD-WRT Forum Forum Index ->Senao Devices

Posted: Sun Jun 27, 2010 13:30 Post subject:: the 2611 is in fact a 2610. Just a new name. If you open the enclosure, you will also find the old 2610 board name and its technically totally identical and compatible. But i made a new firmware for it to avoid confusion. The only difference in it is, that it shows a different device name in the info section. Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade. Setting up the EnGenius EOC2611P - although this video is for the 2611p, the set-up screens are the same for the 1650. Solwise Ltd is a company registered in England. Eoc2611p: EOC2611P Issues flashing firmware: 4: nafoibot: 12710: Mon Feb 04, 2013 19:39. I can not update the firmware DD-WRT for EnGenius EOC-5610: 2.

View previous topic :: View next topic

Author

Message

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Tue Apr 13, 2010 7:50 Post subject: EOC-2611P ( Support DD-WRT or not? )
I have recently bought this Engenius EOC2611P can it support dd-wrt doesn't have logo DD-WRT on the box.

Sponsor
<=' td='>

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Thu Apr 29, 2010 2:11 Post subject:

Sash wrote:

never seen this before.
gimme: http://dd-wrt.com/site/support/router-detection

Here it is
http://www.engeniustech.com/resources/EOC2611P%20Datasheet.pdf

Sash
DD-WRT Guru
Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

Posted: Thu Apr 29, 2010 9:47 Post subject:

for me its the same as the 2610 so try to flash it with the 2610 build
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Thu Apr 29, 2010 16:47 Post subject:

Sash wrote:

for me its the same as the 2610 so try to flash it with the 2610 build

There is no ddwrt logo on the box like EOC2610

Sash
DD-WRT Guru
Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

Posted: Thu Apr 29, 2010 18:08 Post subject:
it doesnt matter _________________ Forum Guidelines...How to get help & Forum Rules & RTFM/STFW & Throw some buzzwords into the WIKI search _________________ I'm NOT rude, just offer pure facts! _________________ Atheros (TP-Link & Clones, etc ) debrick service in EU _________________ Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Fri Apr 30, 2010 2:59 Post subject:

Sash wrote:

it doesnt matter

Ok will try to play with it todayn risk it

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Sun Jun 27, 2010 11:40 Post subject:
Did anyone else manage to flash this one?

Sash
DD-WRT Guru
Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

Posted: Sun Jun 27, 2010 12:41 Post subject:
we'll have offical support with the next builds _________________ Forum Guidelines...How to get help & Forum Rules & RTFM/STFW & Throw some buzzwords into the WIKI search _________________ I'm NOT rude, just offer pure facts! _________________ Atheros (TP-Link & Clones, etc ) debrick service in EU _________________ Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!

BrainSlayer
Site Admin
Joined: 06 Jun 2006
Posts: 7033
Location: Dresden, Germany

Posted: Sun Jun 27, 2010 13:30 Post subject:

the 2611 is in fact a 2610. just a new name. if you open the enclosure, you will also find the old 2610 board name and its technically totally identical and compatible. but i made a new firmware for it to avoid confusion. the only difference in it is, that it shows a different device name in the info section
_________________
'So you tried to use the computer and it started smoking? Sounds like a Mac to me..' - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Sun Jun 27, 2010 13:54 Post subject:

BrainSlayer wrote:

I check the PDF
http://www.engeniustech.com.sg/files/pdf/EOC2611P-26-11-2009.pd
Atheros AR2316 Single Chip and EOC-2610 is AR2315
I need to use apflash51 rite now no machines with xp all windows 7 will try it tommorow at the office
Anyway have the new firmware comes out ? I will try the EOC-2610 firmware that showed recommended hopefully that one is compatible . This device got polarization on it antenna panel hopefully dd-wrt can custom this

darknforce
DD-WRT Novice
Joined: 15 Jun 2006
Posts: 40

Posted: Tue Jun 29, 2010 6:22 Post subject:
Ok managed to flash the AP into dd-wrt and it's confirmed compatible However the dd-wrt detect it as EOC-2610 Will post screenshot later on

nokaman
DD-WRT Novice
Joined: 08 Jun 2011
Posts: 3

Posted: Wed Jun 08, 2011 10:12 Post subject:

Hi,
I just wonder if this flash that you did is working perfectly. Hope to hear from you soon. thanks..

darknforce wrote:

Ok managed to flash the AP into dd-wrt and it's confirmed compatible
However the dd-wrt detect it as EOC-2610
Will post screenshot later on

nokaman
DD-WRT Novice
Joined: 08 Jun 2011
Posts: 3

Posted: Thu Jun 09, 2011 11:56 Post subject: Re: EOC-2611P ( Support DD-WRT or not? )

Hi Darknforce,
Try to find this.
Path: Downloads › others › eko › BrainSlayer-V24-preSP2 › 2011 › 02-17-11-r16214 › senao-eoc2611
I am having a hard time puting my EOC 2611p to go on redboot.
Regards, Nokaman

darknforce wrote:

I have recently bought this Engenius EOC2611P can it support dd-wrt doesn't have logo DD-WRT on the box.

nokaman
DD-WRT Novice
Joined: 08 Jun 2011
Posts: 3

Posted: Thu Jun 16, 2011 0:50 Post subject:
I Finally flash it... I never thought that I need to use windows xp to get the exact 2seconds that I need. If you use windows 7 you will never get it...

DD-WRT Forum Forum Index ->Senao Devices

All times are GMT

Navigation

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

EnGenius 2610 / 1650 client router configuration.

Firmware Upgrade D-link

If you purchased on of our bridge kits you will need 2 standard straight through ethernet cables available at your local store. One cable will run from your computer to the power injector the other from the PoE side of the injector to the bridge up to 300 feet away. You will also need to switch the antenna over to external ( next to the connector).

We are going to show you how to use the unit to connect to a remote access point in 8 easy steps. This is the perfect configuration for boaters, RVers and many other mobile applications.

1) set your computer IP address to 192.168.1.100

2) log into the eoc-2610 at 192.168.1.1 un admin pw admin, click on system / system properties select client router mode and hit apply.

3) click on router / LAN settings make the following changes (the address of the unit will now be 192.168.123.1 do not forget this)

4) change your computers ip address back to DHCP for IP and DNS like below.

5) log into the unit at 192.168.123.1 , click on router / WAN settings change connection type to DHCP and hit apply.

6) Now lets turn the power up on this puppy click on wireless / wireless advanced and select 28dBm hit apply.

7) click on wireless / wireless network site survey button , select the AP to connect to by clicking the MAC address and click apply. (Try and connect to a open AP where under the security column you see NONE, if the AP has encryption enabled you must get the key from the owner and enter it under encryption)

8) Click on status connection status you should see associated next to connection status and have a IP address under WAN / IP address. If not try another AP or move closer.

Engenius Default Password

You should now have a Internet connection! To manage the bridge in the future go to 192.168.123.1 and follow step 6.